OEM Part
OEM Flip Remote Key for Kia Venga (2015 + ) 95430-1P500

Aftermarket Flip Remote Key for Kia Venga (2015 + )

Kia Equivalent Part Number: 954301P500
3 Buttons: Lock, Unlock and Boot
Transponder: ID46 - PCF7936
Frequency: 433 Mhz
Battery Type: CR2032
Key Blade: Not Included (KIA-KB20)

quality as the genuine part but is supplied without the manufacturer’s branded packaging and is not a manufacturer approved genuine part.

This key comes complete with all electronics but is without key blade. Please see the 'Related Products' tab for the correct key blade. 

Suitable for the following models (excluding models with keyless proximity system):

Kia Venga (01/06/2014 - 11/04/2019)

Dates are given as a guide only and we cannot take any responsibility for incorrect part compatibility. If you are unsure if this is the correct part for your vehicle please fill in our Parts Enquiry form and we will confirm the correct part number for you.


The key will need to be programmed before it will start the car and open and lock the doors remotely. Please see the 'Key Programming Information' tab above for guidance on who will be able to program this key type.


Trade Customers:

Customers who are in the locksmith or motor trade may register for a trade account. Trade account customers get preferential pricing and loyalty discounts. Please register using the link at the top of the page to find out more.

Keys Cut to Key Number

We can cut keys to the manufacturer's key number (often referred to as the 'key code'). For this particular blade the key number will usually be in the service book and will start with one or two letters followed by four numbers, e.g. T1000 / KE1000.

NOTE: The key number will not be on the key itself.

Keys Cut to Photo

If the option for 'Cut to Photo' is shown in the key cutting drop down box we can cut the key to a clear picture of the blade. The blade should ideally be on a white background with the end of the blade facing towards the right. The picture should not be blurred and the cuts of the key should be easily identifiable. You can see an example picture here.

Keys Cut to VIN (Chassis Number)

We can cut the key to your VIN and supply you with the key code and immobiliser PIN required for programming (where available). To do this we require a copy of the inside page of the logbook / ownership document, detailing the vehicle's registration, VIN and vehicle owner's details. The vehicle owner's details must match the delivery address details when placing your order. Please scan or take a clear photo of the log book and upload it using the ‘upload a photo’ option.

IMPORTANT: Keys cut to VIN will be cut to the original locks of the vehicle. If the vehicle has previously had the locks changed then obviously this key will not work. Keys cut to VIN are non-refundable.

Important Information

The key will need to be programmed before it will start the car and open and lock the doors remotely. Please see the following guidance for who will be able to program this key type.

Who can program this key?
Main dealer – Yes
Independent garage – Yes
Specialist auto electrician – Yes
Professional vehicle locksmith – Yes

Programming Method:
Immobiliser: Diagnostically with PIN code
Remote: Diagnostically

Be the first to Write a Review for this item!

Model:  KIA-R58E
Bar Code:  KIA-R58E
Brand:  Mobis

OEM Flip Remote Key for Kia Venga (2015 + ) 95430-1P500

Our Price:  £98.90
(Exc. 20% VAT)(£118.68 Inc. VAT)



In stock

Genuine Kia Remote Key Blade (81996-1P200)Genuine Kia Remote Key Blade (81996-1P200)
Genuine Kia Retaining Pin (81926-1U000)Genuine Kia Retaining Pin (81926-1U000)
Related Products
Genuine Part
Genuine Kia Remote Key Blade (81996-1P200)

Kia Part Number: 81996 1P200
Profile: TBC

Genuine Part
Genuine Kia Retaining Pin (81926-1U000)