Aftermarket Transponder Key for Mitsubishi Carisma (HU56 / ID73)

Aftermarket Part
Aftermarket Transponder Key for Mitsubishi Carisma (HU56 / ID73)
  Zoom
Our Price:  £9.95(Exc. 20% VAT)(£11.94 Inc. VAT)Earn 9 Loyalty Points
Key Cutting:  
Key Number:  
VIN (Chassis Number):  
Upload a Photo:  
Upload a Photo:  

Model:  MIT-T2A
Brand:  Aftermarket

Availability:  

  

In stock, immediate despatch


Aftermarket Transponder Key for Mitsubishi 

Transponder: ID73 - PCF7931
Key Blade: HU56

This key comes complete with a transponder chip and can be supplied either blank (uncut) or cut to your vehicle. To find out more about our cutting service please see the ‘Key Cutting Information’ tab above.

Suitable for the following models:

Mitsubishi Carisma (1996 - 2000)

Dates are given as a guide only and we cannot take any responsibility for incorrect part compatibility. If you are unsure if this is the correct part for your vehicle please fill in our Parts Enquiry form and we will confirm the correct part number for you.

IMPORTANT:

The key will need to be programmed before it will start the car. Please see the 'Key Programming Information' tab above for guidance on who will be able to program this key type.

 

Trade Customers:

Customers who are in the locksmith or motor trade may register for a trade account. Trade account customers get preferential pricing and loyalty discounts. Please register using the link at the top of the page to find out more.

 

 

 

Keys Cut to Key Number

We can cut keys to the manufacturer's key number (often referred to as the 'key code'). For this particular blade the key number will usually be printed in the service book and will start with two letters followed by four numbers, e.g. DH1000.

NOTE: The key number will not be on the key itself. 

Keys Cut to Photo

If the option for 'Cut to Photo' is shown in the key cutting drop down box we can cut the key to a clear picture of the blade. The blade should ideally be on a white background with the end of the blade facing towards the right. The picture should not be blurred and the cuts of the key should be easily identifiable. You can see an example picture here.

Keys Cut to VIN (Chassis Number) - UK Vehicles Only

We can cut the key to your VIN and supply you with the key code. To do this we require a copy of the inside page of the logbook / ownership document, detailing the vehicle's registration, VIN and vehicle owner's details. The vehicle owner's details must match the delivery address details when placing your order. Please scan or take a clear photo of the log book and upload it using the ‘upload a photo’ option.

Note: It is not always possible to obtain the key cutting code from the vehicle's chassis number as it is the responsibility of the supplying dealer to add this information to the Mitsubishi security database and this is not always done. We will inform you if it is not possible to obtain the code and offer alternative methods.

IMPORTANT: Keys cut to VIN will be cut to the original locks of the vehicle. If the vehicle has previously had the locks changed then obviously this key will not work. Keys cut to VIN are non-refundable.

Important Information

The key will need to be programmed before it will start the car. Please see the following guidance for who will be able to program this key type.

Who can program this key?
Main dealer – No
Independent garage – Possibly
Specialist auto electrician – Yes
Professional vehicle locksmith – Yes

Programming Method:
Immobiliser: Pre-code by EEPROM and then add diagnostically

Be the first to Write a Review for this item!