Keys Cut to Key Number
We can cut keys to the manufacturer's key number (often referred to as the 'key code'). For this particular blade the key number will usually written on the 'Car Pass' (a credit card sized piece of card labelled 'Car Pass') and will start with one letters followed by four numbers, e.g. Z1234.
NOTE: The key number will not be on the key itself. The key number is NOT 3579.
Keys Cut to Photo
If the option for 'Cut to Photo' is shown in the key cutting drop down box we can cut the key to a clear picture of the blade. The blade should ideally be on a white background with the end of the blade facing towards the right. The picture should not be blurred and the cuts of the key should be easily identifiable. You can see an example picture here.
Keys Cut to VIN (Chassis Number)
We can cut the key to your VIN and supply you with the key code and immobiliser PIN required for programming (where available). To do this we require a copy of the inside page of the logbook / ownership document, detailing the vehicle's registration, VIN and vehicle owner's details. The vehicle owner's details must match the delivery address details when placing your order. Please scan or take a clear photo of the log book and upload it using the ‘upload a photo’ option.
IMPORTANT: Keys cut to VIN will be cut to the original locks of the vehicle. If the vehicle has previously had the locks changed then obviously this key will not work. Keys cut to VIN are non-refundable.