Genuine Remote Key for Land Rover  

Land Rover Part Number: LR088260 (CWE500041SW)
3 Buttons: Lock, Unlock and Custom
Transponder: Hitag 2 (PCF7941)
Frequency: 433 Mhz
Battery Type: Rechargeable
Key Blade: HU101
ISN: 5237
Silca Card: 1838

Genuine Land Rover remote key. This key comes cut and pre-coded to VIN. A copy of the registration certificate and proof of ID must be uploaded when purchasing this product.  Without this we cannot proceed with your order.

This item is special order. The factory lead time is normally 7 - 10 days, but can take longer. This part CANNOT BE CANCELLED once ordered.

Suitable for the following models:

Land Rover Discovery (2005 - 2009) - VIN until 9A999999
Range Rover Sport (2005 - 2009) - VIN until 9A999999

Dates are given as a guide only and we cannot take any responsibility for incorrect part compatibility. If you are unsure if this is the correct part for your vehicle please fill in our Parts Enquiry form and we will confirm the correct part number for you.

IMPORTANT:

The key will need to be programmed before it will start the car and open and lock the doors remotely. Please see the 'Key Programming Information' tab above for guidance on who will be able to program this key type.

Trade Customers:

Customers who are in the locksmith or motor trade may register for a trade account. Trade account customers get preferential pricing and loyalty discounts. Please register using the link at the top of the page to find out more.

Keys Cut to Key Number

We can cut keys to the manufacturer's key number (often referred to as the 'lockset code'). For this particular blade the key number will usually be on a white sticker (originally attached to the keys) with the description 'detach and keep in a safe place'. The key number will consist of four numbers between 0001 and 4000. It is sometimes displayed with two letters and and three zeros e.g. HA0001234. For left hand drive vehicles the key number may be followed by the letters LH, e.g. 1234LH.

NOTE: The key number will not be on the key itself. 

Keys Cut to Photo

If the option for 'Cut to Photo' is shown in the key cutting drop down box we can cut the key to a clear picture of the blade. The blade should ideally be on a white background with the end of the blade facing towards the right. The picture should not be blurred and the cuts of the key should be easily identifiable. You can see an example picture here.

IMPORTANT: Keys cut to key number will be cut to the original locks of the vehicle. If the vehicle has previously had the locks changed then obviously this key will not work. Keys cut to key number are non-refundable.

Important Information

The key will need to be programmed before it will start the car and open and lock the doors remotely. Please see the following guidance for who will be able to program this key type.

Who can program this key?
Jaguar Land Rover main dealer – Yes
Independent garage – Yes
Specialist auto electrician – Yes
Professional vehicle locksmith – Yes

Programming Method:
Immobiliser: Diagnostically
Remote: Automatically with the Immobiliser

NOTE:

A working key is required to program additional blank remote keys (you must start the procedure with the working key). If no working keys are available you will need to order the key on VIN. Please see out other items for more information.